STOREFRONT: Aluminum
Clad
Tajima is your partner for all clad
aluminum entrances to your projects.
Fine craftsmanship and broad experience characterizes our
engineering and manufacturing of any aluminum system cladded
with any material. No matter the material – stainless
steel, bronze, brass, – Tajima has the capacity to help
you succeed. Tajima can supply the storefront and the doors
already cladded or we can clad your system.
Features
and Benefits
- Custom engineered and fabricated systems.
- Lower cost to achieve stainless or bronze appearance.
- Flawless lines and surfaces which minimize the common
‘house-of-mirrors’ oil-canning.
- “Crisp” corners created by our sophisticated
machinery per Architect request.
- Minimum radius corners for clean lines & reflections.
- Precision fit at all corners & joints.
C45 Series storefront system
1¾” x 4½” Center Glazed Framing
Sections
The C45 Series storefront system has a 1¾”
face dimension x 4½” in depth and accepts ¼”
glazing. The system incorporates an advanced framing design
which reduces installation time and material costs.
All storefront sections are extruded of 6063-T5 aluminum
alloy. The C45 Series system has been tested to meet or
exceed established ASTM standards for air, water, and structural
performance. Certified test reports are available upon request.
CAD
PDF
SPECS
CI45 Series storefront system
2” x 4½” Center Glazed Framing Sections
The CI45 Series storefront system has a 2” face
dimension x 4½” in depth and accepts ¼”
and 1” glazing. The system incorporates an advanced
framing design which reduces installation time and material
costs.
All storefront sections are extruded of 6063-T5 aluminum
alloy. The CI45 Series system has been tested to meet
or exceed established ASTM standards for air, water, and
structural performance. Certified test reports are available
upon request.
CAD
PDF
SPECS
F145 Series Window Wall System
2” x 4½” Offset Glazed Framing Sections
The F145 Series system has a 2” face dimension
x 4½” in depth and accepts ¼”
and 1” dual glazing. This system offers the economy
of a standard system with the versatility to fulfill most
low and high rise applications. This is a high performing
wall system with the most demanding wind and dead load
requirements. The design is able to achieve a monumental
interior profile while maintaining exterior sightlines.
All sections are extruded of 6063-T5 aluminum alloy.
The F145 Series system has been tested to meet or exceed
established ASTM standards for air, water, and structural
performance. Certified test reports are available upon
request.
CAD
PDF
SPECS
F160 Series Window Wall System
2¼” x 6” Offset Glazed Framing Sections
The F160 Series system has a 2¼” face dimension
x 6” depth. This system offers the economy of a
standard system with the versatility to fulfill most low
and high rise applications. This is a high performing
wall system with the most demanding wind and dead load
requirements. The design is able to achieve a monumental
interior profile while maintaining exterior sightlines.
All sections are extruded of 6063-T5 aluminum alloy.
The F160 Series system has been tested to meet or exceed
established ASTM standards for air, water, and structural
performance. Certified test reports are available upon
request.
CAD
PDF
SPECS
All systems are fully compatible with
all Sun Valley Products, Inc.
